Montero Sport 2WD V6-3.0L SOHC (1997)
5. Remove the piston seal and caliper body. Remove piston seal with finger tip.
CAUTION: Do not use a screwdriver or other tools in order to prevent damage to the inner cylinder.
NOTE: Clean the piston surface and the inner cylinder with trichloroethylene, alcohol, DOT 3 or DOT 4 brake fluid.
6. Reverse procedure to install, noting the following:
7. Install the guide pin and lock pin as shown in the illustration so that each head mark of the guide pin and the lock pin matches the indication mark
(G or L) located on the caliper body.
