Montero Sport 2WD V6-3.0L SOHC (1997)
Radiator Cap: Testing and Inspection
1. Use a cap adapter to attach the cap to the tester.
NOTE: Be sure that the cap is clean before testing, since rust or other foreign material on the cap seal will cause an improper indication.
2. Increase the pressure until the indicator of the gauge stops moving.
-
Standard value: 74 - 103 kPa (11 - 15 psi)
-
Limit: 64 kPa (9.2 psi)
3. Replace the radiator cap if the reading does not remain at or above the limit.
