mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

High Pressure Safety Valve HVAC > < Heater Core Case|Removal and Installation|Page 5425
Page 2
background image

REAR BLOWER MOTOR INSPECTION

Check that the motor rotates when the battery voltage is applied between the terminals. Make sure that there is no abnormal noise from the motor at
this time.

RESISTOR CHECK

Use an ohmmeter to check the resistance between terminals number 3 and number 4.
Check that the measured value is at the standard value. 
Standard value: 39 Ohms

High Pressure Safety Valve HVAC > < Heater Core Case|Removal and Installation|Page 5425