Montero Sport 2WD V6-3.0L SOHC (1997)
Leak Detection Solenoid: Testing and Inspection
INSPECTION
1. Connect a hand vacuum pump to nipple (A) of the solenoid.
2. Check air tightness by applying a vacuum with voltage applied directly from the battery to the evaporative emission ventilation solenoid and
without applying voltage.
3. Measure the resistance between the terminals of the solenoid.
Standard value: 17 - 21 Ohms [at 20°C (68°F)]
4. Replace solenoid if resistance is out of specification.
