Montero Sport 2WD V6-3.0L SOHC (1997)
Ignition Power Transistor
Ignition Power Transistor - Chart
No. 3 - No. 6 coil side
1. Connect the negative (-) terminal of the 1.5 V power supply to terminal (4) of the ignition power transistor, and then check whether there is
continuity between terminal (11) and terminal (4) when terminal (1) and the positive (+) terminal are connected and disconnected.
NOTE: Connect the (-) probe of the circuit tester to terminal (11).
2. Replace the ignition power transistor if there is a malfunction.