Montero Sport 2WD V6-3.0L SOHC (1997)
Impact Sensor: Service and Repair
Front Impact Sensor
WARNING:
-
Never repair or disassemble the front impact sensor. If faulty, replace it.
-
Handle the front impact sensors very carefully, taking care not to drop them or otherwise subject them to impact. If a sensor is dented,
cracked, deformed or rusted, replace it with a new one.
-
Replace the sensors with new ones after the air bag has deployed.
REMOVAL AND INSTALLATION
Pre-removal Operation
Turn the ignition key to the "OFF" position.
Front Impact Sensors
Removal Steps
-
Post-Installation Inspection
1. Negative (-) Battery Cable Connection
2. Front Impact Sensor
-
Pre-Installation Inspection
Step 1: Negative (-) Battery Cable Disconnection