Montero Sport 2WD V6-3.0L SOHC (1997)
Throttle Position Sensor: Testing and Inspection
1. Disconnect the throttle position sensor connector.
2. Measure the resistance between the throttle position sensor side connector terminal 1 and terminal 4.
Standard value: 3.5-6.5 K Ohms
3. Measure the resistance between the throttle position sensor side connector terminal 1 and terminal 3.
Normal Condition
NOTE: After replacement, the throttle position sensor should be adjusted.
4. If the resistance is outside the standard value or if it doesn't change smoothly, replace the throttle position sensor.