Montero Sport 2WD V6-3.0L SOHC (1997)
(2) Connect a digital voltmeter between the throttle position sensor terminal 3 (sensor output) and terminal 1 (sensor ground.)
(3) Turn the ignition switch "ON" (but do not start the engine).
8. Check the throttle position sensor output voltage.
Standard value: 400-1,000 mV
9. If there is a deviation from the standard value, check the throttle position sensor and the related harness.
10. Remove the feeler gauge.
Confirm the closed throttle position switch changed from "OFF" to "ON".
11. Turn the ignition switch "OFF".
