Montero Sport 2WD V6-3.0L SOHC (1997)
1. Loosen the upper arm mounting bolts and nuts.
CAUTION:
-
Difference in shim thickness between front and rear must be 4 mm (0.6 inch) or less.
-
Do not use 4 or more shims at one location.
2. Increase or decrease shims between the upper arm shaft and crossmember to adjust the camber and caster.
NOTE: Charts for shim increase or decrease.
How to use charts as follows: Calculate the difference of the measured value from the standard value of the camber and caster to decide how many
adjusting shims to increase or decrease.
EXAMPLE: To decrease camber by 30' and caster by 40', increase combined front side shim thickness by 3 mm (0.12 inch) and increase
