Montero Sport 2WD V6-3.0L SOHC (1997)
Center Link: Service and Repair
STEERING LINKAGE
REMOVAL
Follow removal steps outlined in illustration.
NOTE: Removal service points as follows:
a. Tie rod assembly/relay rod/idler arm assembly removal (2, 3 & 5).
Required Special Tool: MB990635 or MB991113: Steering Linkage Puller or equivalents.
WARNING: Support special tool MB990635 or MB991113 with a cord, etc. to prevent it from coming off.
NOTE: Only loosen the tie rod end mounting nut; but do not remove it from the ball joint.
Use special tool MB990635 or MB991113 to disconnect the ball joint.
