Montero Sport 2WD V6-3.0L SOHC (1997)
Idler Arm: Service and Repair
Dust Cover Replacement
Required Special Tool: MB990776: Front Axle Base or equivalent.
NOTE: When the dust cover is damaged accidentally during service work, replace the dust cover only as follows:
1. Fill inside the dust cover with multipurpose grease.
2. Apply the specified sealant to the dust cover lip.
Specified sealant: 3M ATD Part number 8663 or equivalent.
3. Using special tool MB990776, install the dust cover to the tie rod end ball joint.
