Montero Sport 2WD V6-3.0L SOHC (1997)
E. Thrust race / thrust bearing / thrust race installation. (12, 13 & 14)
Apply petrolatum to the thrust bearing, thrust race [28.8 mm (1.13 inch) in inner diameter] and thrust race [27.6 mm (1.09 inch) in inner
diameter] and attach them to the rear planetary ring gear in the illustrated order and direction.
F. Planetary carrier thrust washers No. 1 and No. 2 installation. (9 & 10)
1. Align the tabs of the thrust washer number 1 with the hole of the rear planetary gear. Install the washer to the gear.
2. Turn the rear planetary gear over. Aligning the convex of the thrust washer No. 2 with the hole of the rear planetary gear, install the washer
to the gear.
G. One-way clutch No. 2 installation. (8)
Install the one-way clutch No. 2 to the rear planetary gear in the illustrated direction.
H. One-way clutch inner race installation. (6)
