Montero Sport 2WD V6-3.0L SOHC (1997)
9. Remove the primary regulator valve sleeve and primary regulator valve plunger together and then remove the spring, washer and primary regulator
valve.
10. Remove the primary regulator valve plunger from the primary regulator valve sleeve.
11. While pushing the sleeve with a finger, use a magnet to remove the seat.
12. Remove the accumulator control valve sleeve, accumulator control valve and spring together.
13. Remove the spring and accumulator control valve from the accumulator control valve sleeve.
14. Using a magnet, remove the pin.
15. Remove the plug.
Inspection