Montero Sport 2WD V6-3.0L SOHC (1997)
Differential Carrier: Specifications
SERVICE SPECIFICATIONS
Clearance Between Friction Plate And Friction Disc:
Standard Value ........................................................................................................................................................ 0.06-0.20 mm (0.002-0.008 inch)
Clearance In Side Gear Axial Direction:
Standard Value ........................................................................................................................................................ 0.05-0.20 mm (0.002-0.008 inch)
Difference Between Left And Right Dimensions From Back Thrust Face of Pressure Ring to End of Thrust Washer:
Standard Value .......................................................................................................................................................................... 0.05 mm (0.002 inch)
Clutch Plate Preload:
When Equipped With New Clutch Plates ............................................................................................................................. 39-74 Nm (29-54 ft. lbs)
When Equipped With Old Clutch Plates ............................................................................................................................... 25-74 Nm (18-54 ft. lbs)
Friction Plate And Friction Disc Warping:
Flatness (Limit) .......................................................................................................................................................................... 0.08 mm (0.003 inch)
Friction Plate And Friction Disc Wear:
Difference In The Thickness Of The Friction Surfaces And The Projections:
Limit ...................................................................................................................................................................................... 0.1 mm (0.004 inch)
Horizontal Difference Between Friction Plate and Friction Disc Thickness:
Standard Value ..................................................................................................................................................................... 0-0.05 mm 0-0.002 inch)