mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Idler Arm|Removal and Installation|Page 4534 > < Idler Arm|Removal and Installation|Page 4532
Page 3
background image

Check the rubber parts for cracks and break.

DUST COVER CHECK
1. Press the dust cover with a finger to check whether the dust cover is cracked or damaged.
2. If there are any cracks in or damage to the dust cover, replace the tie rod end assembly or idler arm.

NOTE:  Cracked or damaged dust cover may cause damage to the ball joint. In addition, if the dust cover is damaged during service work, replace
the dust cover.

Idler Arm|Removal and Installation|Page 4534 > < Idler Arm|Removal and Installation|Page 4532