Montero Sport ES 4WD V6-3.0L SOHC (2002)
1. Fill the dust cover with the specified grease, and apply the grease to the go to top of the dust cover and contact surface of the lip.
Specified grease: Multipurpose grease SAE J310, NLGI No.2 or equivalent
2. Apply the 3M AAD Part number 8672, 8679, 8678, 8661, 8663 or equivalent to the dust cover lip.
3. Using special tool MB990776, install the dust cover to the tie rod end ball joint.
4. Press the dust cover with a finger to check whether the dust cover is cracked or damaged.