mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Air Bag Systems > < Repairs and Inspections Required After a Collision|Service and Repair
Page 2
background image

Front impact sensors

1.  Check the fender shield panel for deformation or rust.
2.  Check the front impact sensor for dents, cracks, deformation or rust.
3.  Check the sensor harnesses for binding, the connectors for damage, and the terminals for deformation.

Clock spring

1.  Check the clock spring connectors and protective tubes for damage, and the terminals for deformation.
2.  Visually check the case for damage.

Steering wheel, steering column and intermediate joint

1.  Check the wiring harness (built into the steering wheel) and the connectors for damage, and the terminals for deformation.
2.  Install the air bag module to check fit or alignment with the steering wheel.
3.  Check the steering wheel for noise, binding or difficult operation and excessive free play.

SRS-ECU

1. Check the SRS-ECU case and brackets for dents, cracks or deformation.
2. Check the connector for damage, and the terminals for deformation.

Air Bag Systems > < Repairs and Inspections Required After a Collision|Service and Repair