Montero Sport LS 2WD V6-3.0L SOHC (1998)
If the harness wires between the ignition switch and ETACS-ECU connector D-11 or tone alarm-ECU connector D-12 are damaged, repair them.
Check that the malfunction is eliminated.
If the harness wires are in good condition, replace the ETACS-ECU or tone alarm-ECU. Check that the malfunction is eliminated.
NOTE: After inspecting junction block connector D-08, Inspect the wire. If junction lock connector D-08 is damaged, repair or replace it.
Procedure 4 Ignition Key Reminder Alarm Does Not Stop Sounding