Montero Sport LS 2WD V6-3.0L SOHC (1998)
>B< Return Pipe Installation (10)
Align the marks on the return pipe and steering gear box, and install the return pipe.
>C< Return Pipe Installation (8)
Connect the return pipe so that the marking is positioned as shown in the illustration.
>D< Pressure Pipe/Pressure Hose/Pressure Tube Installation (6)
1. Connect the pressure tube so that the its notched part contacts the suction connector.
2. Align the mating marks on the pressure hose and pressure pipe, and install the pressure hose.
>E< Return Hose Installation (4)
Install the return hose so that the marking faces towards front of the vehicle.