Montero Sport LS 2WD V6-3.0L SOHC (1998)
1. Use special tool MB990840 and MB991410 to press in the journal bearing on one side, and take out the journal bearing on the opposite side.
2. Insert special tool MB990840 and MB991410 into the other side and press the journal to remove the first journal bearing that was pushed.
<C> Center Yoke Removal
Place a mating mark on the center yoke and front propeller shaft, and then remove the center yoke.
<D> Center Bearing Assembly Removal
After removing the rubber mount, use a commercially available puller to remove the center bearing.
<E> Sleeve Flange Removal.
Place a mating mark on the sleeve flange and front propeller shaft assembly, and then remove the sleeve flange.
Assembly Service Points
>A< Center Bearing Assembly/Center Yoke Installation
