Montero Sport LTD 2WD V6-3.5L SOHC (2000)
Audible Warning Device: Testing and Inspection
Introduction to Seat Belt Warning System Diagnosis
The seat belt warning system is controlled by the ETACS-ECU.
The seat belt warning system flashes the seat belt warning light in the combination meter for six seconds after the ignition switch is turned "ON" and
sounds a seat belt tone alarm if the seat belt is not fastened.
If one of the following symptoms occurs, a malfunction may have occurred.
-
The seat belt warning light does not flicker even when the ignition switch is turned "ON."
-
The seat belt tone alarm does not sound even when the ignition switch is turned "ON" while the seat belt is not fastened.
-
The seat belt tone alarm does not stop even when the seat belt is fastened within six seconds after the seat belt tone alarm starts sounding.