Montero Sport LTD 2WD V6-3.5L SOHC (2000)
Ignition Key Hole Illumination Light Circuit
CIRCUIT OPERATION
-
When the driver's door is opened without removing the ignition key, the tone alarm will sound intermittently to remind that the ignition key has not
been removed.
-
The ETACS-ECU monitors the ignition switch by detecting voltage from the ignition switch.
-
The ETACS-ECU judges that the driver's side door is opened or closed by detecting voltage from the front door switch (LH).
-
The ETACS-ECU judges that the ignition key is inserted or removed by detecting voltage from the key reminder switch.
-
When the driver's door is opened (door switch ON), the ignition key hole illumination light will illuminate. When the driver's door is closed (door
switch OFF), the ignition key hole illumination light will go out within 15 seconds.
TECHNICAL DESCRIPTION (COMMENT)
The input signal from the ignition switch may be defective, or the ETACS-ECU may be defective. If the multi-purpose fuse is blown, the harness may be
short circuited.
TROUBLESHOOTING HINTS
-
malfunction of the fuse
-
malfunction of the connector
-
Damaged harness wire
-
malfunction of the ETACS-ECU
