Montero Sport LTD 2WD V6-3.5L SOHC (2000)
2. Measure the voltage between terminal number 1 and ground.
-
Voltage should be approximately 12 volts (battery positive voltage)
If not approximately 12 volts, go to Step 9.
If approximately 12 volts, go to Step 10.
STEP 9. Check harness connector D-16 at the key reminder switch for damage.
If harness connector D-16 is damaged, repair or replace it. Refer to Harness Connector Inspection. Check that the malfunction is eliminated.
If harness connector D-16 is in good condition, go to Step 10.
STEP 10. Check the harness wires between fusible link number 6 and key reminder switch connector D-16.
If the harness wires between fusible link number 6 and key reminder switch D-16 are damaged, repair them. Check that the malfunction is eliminated.
If the harness wires are in good condition, go to Step 11.