Montero Sport LTD 2WD V6-3.5L SOHC (2000)
1. Place a mating mark on the differential companion flange and flange yoke and remove the propeller shaft.
NOTE: Damage to the boot can be avoided, and the work will be easier, if a piece of shop towel or similar material is inserted in the boot
2. Use the plug as a cover so that no foreign material gets into the transmission or transfer.
INSTALLATION SERVICE POINT
>A< PROPELLER SHAFT ASSEMBLY/FRONT
PROPELLER SHAFT ASSEMBLY/REAR
PROPELLER SHAFT ASSEMBLY INSTALLATION
CAUTION:
-
Tighten the installation bolts after removing oil and grease from threads to prevent them from loosening due to lubrication.
-
Be careful not to damage the lip section of the transfer case oil seal when installing the propeller shaft.
To reuse the propeller shaft, align the mating marks that were made during removal, and then install the propeller shaft assembly to the companion