Montero Sport XLS 4WD V6-3.0L SOHC (1999)
<4WD>
REMOVAL AND INSTALLATION
CAUTION*: Indicates parts which should be initially tightened, and then fully tightened after placing the vehicle horizontally and loading the full
weight of the engine on the vehicle body.
Installation Service Point
>A< TRANSFER ROLL STOPPER INSTALLATION
1. Tighten the transfer roll stopper provisionally.
2. Make the engine and transmission assembly rest on the engine mount.
3. Tighten the transfer roll stoppers inner and outer finally so that the clearance (a) between the two are at approx. 10 mm (0.4 inch)
4. Check that the right and left clearances (b) between the stoppers are equal.