Montero Sport XLS 4WD V6-3.0L SOHC (1999)
1. Make a notch in the oil seal lip section with a knife, etc.
CAUTION: Be careful not to damage the camshaft and the cylinder head.
2. Cover the end of a flat-tipped screwdriver with a shop towel and insert into the notched section of the oil seal, and pry out the oil seal to
remove it.
Installation Service Points
>A< CAMSHAFT OIL SEAL INSTALLATION
1. Apply engine oil to the camshaft oil seal lip.
2. Use special tools MD998713 and MB991559 to press-fit the camshaft oil seal.
>B< CAMSHAFT SPROCKET INSTALLATION
Use special tools MD998715 and MB990767 in the same way as during removal to install the camshaft sprocket.