Montero Sport XLS 4WD V6-3.0L SOHC (1999)
Fog/Driving Lamp Bulb: Service and Repair
1. Remove the fog light.
2. Loosen the shown screws to remove the under cover.
CAUTION:
-
Do not touch the surface of the bulb with hands or dirty gloves. If the surface does become dirty, clean it with alcohol or thinner, and let it dry
thoroughly before installing.
-
Improper installation of the under cover causes a dullness of the lens or water ingress into the lamp unit. Make sure that the under cover is
installed properly.
3. Unlock the spring which secures the bulb and then remove the bulb.
