mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Transfer Oil Level Check|Page 1017 > < Fluid - Transfer Case|Capacity Specifications|Page 1014
Page 1
background image

Fluid - Transfer Case: Service and Repair
Transfer Oil Level Check

Automatic Transaxle

TRANSFER OIL CHECK <V4A51> 

1. Remove the filler plug.
2. Check that there is oil up the the filler plug hole.
3. Check that the oil is not contaminated and that it has adequate viscosity.
4. Tighten the filler plug to the specified torque.

Tightening Torque: 32 Nm (24 ft. lbs.).

Manual Transaxle

TRANSFER OIL CHECK 

1. Remove the filler plug.
2. Check that the oil level is up to the lower edge of the filler plug hole.
3. Check that the oil is not noticeably dirty, and that it has a suitable viscosity.
4. Tighten the filler plug to the specified torque.

Tightening torque: 32 Nm (24 ft. lbs.) 

Transfer Oil Level Check|Page 1017 > < Fluid - Transfer Case|Capacity Specifications|Page 1014