mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

ABOUT US
MIL ON DTC P0120 Throttle Position (TP) Circuit Defect|Page 2812 > < MIL ON DTC P0120 Throttle Position (TP) Circuit Defect|Page 2810

Montero Sport XLS 4WD V6-3.0L SOHC (1999)

Page 1
background image

Throttle Position Sensor: Adjustments

CLOSED THROTTLE POSITION SWITCH AND THROTTLE POSITION SENSOR ADJUSTMENT

Required Speed Tools:
MB991502: Scan Tool
MB991348: Test Harness Set

1. Connect the scan tool to the data link connector. When not using scan tool MB991502 proceed as follows.

1. Disconnect the connector of the throttle position sensor.

2. Connect an ohmmeter between terminals 2 (closed throttle position switch) and 1 (sensor ground) by using jumper wires.

2. Insert a feeler gauge as follows:

<Vehicles without auto-cruise control system>
Insert a feeler gauge with a thickness of 0.65 mm (0.026 inch) between the fixed SAS and the throttle lever.

<Vehicles with auto-cruise control system>

MIL ON DTC P0120 Throttle Position (TP) Circuit Defect|Page 2812 > < MIL ON DTC P0120 Throttle Position (TP) Circuit Defect|Page 2810