mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Basic Idle Speed Adjustment|Page 2110 > < Basic Idle Speed Adjustment
Page 2
background image

NOTE: If the idling speed is higher than the standard value range even when the SAS is fully closed, check whether or not there is any indication
that the fixed SAS has been moved. If there is an indication that it has been moved, adjust the fixed SAS. <3.0L ENGINE>

8. Turn the ignition switch "OFF".

NOTE: Unless the IAC motor is released, the Actuator test mode will continue 27 minutes.

9. Disconnect scan tool MB991502.

10. Start the engine again and let it idle for about 10 minutes. Check that the idling condition is normal.

Basic Idle Speed Adjustment|Page 2110 > < Basic Idle Speed Adjustment