Montero Sport XLS 4WD V6-3.0L SOHC (1999)
Brush Holder
BRUSH HOLDER CHECK
Check for the continuity between the brush holder plate and the brush holder.
There should be no continuity.
Brushes And Springs Replacement
BRUSH CHECK
1. Brushes that are worn beyond wear limit line, or oil-soaked, should be replaced.
2. When replacing the ground brush, slide the brush from the brush holder by prying the retaining spring back.
OVERRUNNING CLUTCH CHECK
1. While holding the clutch housing, rotate the pinion. The drive pinion should rotate smoothly in one direction, but should not rotate in opposite
direction. If the clutch does not function properly, replace the overrunning clutch assembly.
2. Inspect the pinion for wear or burrs. If the pinion is worn or burred, replace the overrunning clutch assembly. If the pinion is damaged, also inspect
the ring gear for wear or burrs.
FRONT AND REAR BRACKET BUSHING CHECK
Inspect the bushing for wear or burrs. If the bushing is worn or burred, replace the front bracket assembly or rear bracket assembly.
ARMATURE CHECK