Montero Sport XLS 4WD V6-3.0L SOHC (1999)
>B< Bearing /Clutch Gear Installation
1. Use special tool MB990799 to press-fit the bearing to the shoulder of the clutch gear.
CAUTION: Place the special tool against the outer race of the bearing.
2. Use special tool MB990890 or MB990891 to press-fit the bearing to the side of the clutch housing.
>C< Oil Seal Installation
Use special tools M13990938, MB990926 to tap the oil seal.
>D< Spring Pin Installation
Tap the spring pin from the chamfered side of the shift rod until the projection length is 1 - 2 mm (0.04 - 0.08 inch).
>E< Bearing Installation