Montero Sport XLS 4WD V6-3.0L SOHC (1999)
<C> Outer Bearing Inner Race Removal
Install special tool MB990560 as shown in the illustration, and then use a press to remove the outer bearing inner race from the axle shaft.
<D> Bearing Outer Race Removal
Reinstall the outer bearing inner race that was removed previously, and then use special tool MB990799 and a press to remove the outer bearing
outer race.
Assembly Service Points
>A< Bearing Outer Race Installation
Use special tool MB990890 or MB990891 to press-fit the hearing outer race to the bearing case.
>B< Inner Bearing Inner Race/Outer Bearing Inner Race Installation
1. Apply multipurpose grease to the roller surface and ends of the bearing.
2. Pass the axle shaft through the bearing case and the inner bearing inner race and outer bearing inner race.
CAUTION: Both bearing inner race, outer race sets should be press4itted together.
3. Use special tool MB990799 to press-fit the inner bearing inner race and outer bearing inner race to the axle shaft.
>C< Oil Seal Installation