mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fluid - M/T|Capacity Specifications|Page 3900 > < Fluid - M/T|Capacity Specifications|Page 3898
Page 1
background image

Fluid - M/T: Testing and Inspection

MANUAL TRANSMISSION OIL CHECK 

1. Remove the filler plug.
2. Check that the oil level is up to the lower edge of the filler plug hole.
3. Check that the oil is not noticeably dirty, and that it has a suitable viscosity.
4. <In case of V5MT1> 

Coat the thread of the filler plug with Three Bond 1105D or equivalent and tighten to the specified torque.
Tightening torque: 69 Nm (51 ft. lbs.) 
<In case of R5M21> Tighten the filler plug to the specified torque.
Tightening torque: 32 Nm (24 ft. lbs.) 

Fluid - M/T|Capacity Specifications|Page 3900 > < Fluid - M/T|Capacity Specifications|Page 3898