mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Towing and Hoisting|Page 5536 > < Towing and Hoisting|Page 5534
Page 3
background image

FLOOR JACK

CAUTION:

-

A floor jack must never be used on any part of the underbody.

-

Do not attempt to raise one entire side of the vehicle by placing a jack midway between front and rear wheels. This practice may result in
permanent damage to the body.

A regular floor jack may be used under the front crossmember or rear frame.

POST TYPE

CAUTION:  When service procedures require removal of the rear suspension, the fuel tank or the spare tire, place additional weight on the rear end of
the vehicle or anchor the vehicle to a hoist to prevent center of gravity changes. 

Special care should be taken when raising the vehicle on a frame contact type hoist. The hoist must be equipped with the proper adapters in order to
support the vehicle at the proper locations shown in the illustration.
Conventional hydraulic hoists may be used after determining that the adapter plates will make firm contact with the side frame.

Towing and Hoisting|Page 5536 > < Towing and Hoisting|Page 5534