Montero Sport XLS 4WD V6-3.5L SOHC (2002)
<<B>> ROOF DRIP MOLDING REMOVAL
CAUTION: If the moulding has become warped, it should not be reused.
Use special tool MB990449 to lever out the molding.
<<C>> DOOR MOULDING REMOVAL
1. Attach protection tape all the way along the edges of the double-sided tape which is still adhering to the body.
2. Use a resin spatula to scrape off the double-sided tape.
3. Peel off the protection tape.
4. Wipe the body surface and clean it with a shop towel moistened with 3M(TM) AAD Part number 8880 or equivalent.
INSTALLATION SERVICE POINTS
>>A<< DOOR MOLDING INSTALLATION.
Double-sided tape affixing to the door molding (When reusing)
1. Scrape off the double-sided tape with a resin spatula or gasket scraper.