Montero Sport XLS 4WD V6-3.5L SOHC (2002)
1. Scrape off the double-sided tape on the door molding with a resin spatula as possible.
2. Use a shop towel moistened with 3M(TM) AAD Part number 8906 or equivalent to wipe the door molding surface.
3. Remove only a small portion of the residual adhesive.
4. Adhere the double-sided tape as specified on the door molding. (Refer to double-sided tape adherence location.)
INSTALLATION SERVICE POINTS
]]A[[DOOR MOLDING INSTALLATION.
1. Tear off the double-sided tape backing paper.
NOTE: If you attach the adhesive tape to the edge of the backing paper, it will be easy to tear off.
2. Install the door molding.
NOTE: If the double-sided tape is difficult to affix in cold temperature, etc., warm the bonding surfaces of the body and door molding to about 40
- 60° C (104 - 140° F) before affixing the tape.
3. Firmly press in the door molding.