Montero Sport XLS 4WD V6-3.5L SOHC (2002)
Brake Rotor/Disc: Service and Repair
Rear Disc Brake
Replacement
REMOVAL AND INSTALLATION
INSTALLATION SERVICE POINT
>>A< DISC BRAKE ASSEMBLY INSTALLATION
1. In order to measure brake drag torque after pad installation, measure hub torque (A) with the pads removed.
CAUTION: Do not let any oil, grease or other contamination get onto the friction surfaces of the pads and brake discs.
2. After re-installing the caliper support, install the pad clips and pads to the caliper support.
3. Clean the piston, and insert it into the cylinder with special tool MB990520.