mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Water Pump > < Mechanical Specifications|Page 1678
Page 2
background image

Standard value:
Valve opening temperature: 88 ± 1.5°C (190 ± 3°F) 

2. Check that the amount of valve lift is at the standard value when the water is at the full-opening temperature.

NOTE:  Measure the valve height when the thermostat is fully closed, and use this measurement to compare the valve height when the thermostat
is fully open.

Standard value:
Full-opening temperature: 100°C (212°F) 
Amount of valve lift: 10 mm (0.39 inch) 

Water Pump > < Mechanical Specifications|Page 1678