Montero Sport XLS 4WD V6-3.5L SOHC (2002)
2. Temporarily tighten the nut at a position where the end of the shift lock cable is above the red marking on the lock cam.
3. Tighten the nut with the specified torque.
Tightening torque: 12 Nm (106 inch lbs.)
4. Check that the shift lock mechanism operates normally.
>>D<< KEY INTERLOCK CABLE (SELECTOR LEVER SIDE) INSTALLATION
1. Move the selector lever to "P" position.
2. Turn the ignition switch to "LOCK" (OFF) position.
3. Connect the key interlock cable end to the lock cam.
4. Install the key interlock cable temporarily.
5. Push the cable joint on the lock cam gently toward the arrow, and tighten the jam nut to the specified torque.
Tightening torque: 12 Nm (106 inch lbs.)
6. Check that the key interlock mechanism operates normally.
INSPECTION
Move the connector in the direction of the arrow and remove it from the bracket.
POSITION INDICATOR LIGHT CHECK