mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Transfer Oil Level Check|Page 3620 > < Mechanical Specifications|Page 3617
Page 1
background image

Fluid - Transfer Case: Service and Repair
Transfer Oil Level Check

CHECK  

1. Remove the filler plug.
2. Check that the oil level is up to the lower edge of the filler plug hole.
3. Check that the oil is not noticeably dirty.
4. Tighten the filler plug to the specified torque.

Tightening torque: 32 Nm (24 ft. lbs.) 

Transfer Oil Level Check|Page 3620 > < Mechanical Specifications|Page 3617