mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6308 > < Initial Inspection and Diagnostic Overview|Page 6306
Page 6
background image

4. Measure the resistance between terminal numbers 4 and 6.

Q: Is the resistance value less than two Ohms?

YES: Go to Step 9.

NO: Replace the key reminder switch. Then check that the malfunction is eliminated.

STEP 9. Check the input signal from the key reminder switch.

Check that the tone alarm stops sounding when terminal number 6 is grounded.

Q: Is the tone alarm stops sounding?

YES: Go to Step 10.

NO: Go to Step 11.

STEP 10. Check the key reminder switch connector D-16 for damage.

Initial Inspection and Diagnostic Overview|Page 6308 > < Initial Inspection and Diagnostic Overview|Page 6306