mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6644 > < Initial Inspection and Diagnostic Overview|Page 6642
Page 4
background image

YES: Replace the ETACS-ECU. The dome light and cargo space light should illuminate.

NO: Repair them. The dome light and cargo space light should illuminate.

STEP 4. Check the dome light bulb or cargo space light bulb.

Q: Is the dome light bulb or cargo space light bulb in good condition?

YES: Go to Step 5.

NO: Replace it. The dome light and cargo space light should illuminate.

STEP 5. Check the dome light and cargo space light power supply circuit at the dome light connector E-20 <vehicles with sunroof> or E-21
<vehicles without sunroof> and cargo space light connector E-16

1. Disconnect the dome light connector E-20 <vehicles with sunroof> or E-21 <vehicles without sunroof>, cargo space light connector E-16 and

measure at the harness side.

2. Measure the voltage between terminal 1 and ground.

Q: Is the voltage approximately 12 volts (battery positive voltage)

YES: Replace the dome light or cargo space light. The dome light and cargo space light should illuminate.

NO: Go to Step 6.

STEP 6. Check dome light connector E-20 <vehicles with sunroof> or E-21 <vehicles without sunroof>, cargo space light connector E-16 for
damage.

Q: Is dome light connector E-20 <vehicles with sunroof> or E-21 <vehicles without sunroof> cargo space light connector E-16 in good
condition?

Initial Inspection and Diagnostic Overview|Page 6644 > < Initial Inspection and Diagnostic Overview|Page 6642