mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 2940 > < Symptom Related Diagnostic Procedures|Page 2938
Page 8
background image

STEP 10. Check the harness wires connector D-16 at the key reminder switch for damage.

Q: Is key reminder switch connector D-16 in good condition?

YES: Go to Step 11.

NO: Replace it. Then check that the malfunction is eliminated.

STEP 11. Check the harness wires between fusible link number 6 and key reminder switch connector D-16.

NOTE: After inspecting IOD storage connector A-54X, inspect the wire. If IOD storage connector A-54X is damaged, repair or replace it. Refer to
Harness Connector Inspection.

Q: Are the harness wire between fusible link number 6 and key reminder switch connector D-16 in good, condition?

YES: Go to Step 12.

NO: Repair or replace them. Then check that the malfunction is eliminated.

Symptom Related Diagnostic Procedures|Page 2940 > < Symptom Related Diagnostic Procedures|Page 2938