Montero Sport XS 2WD V6-3.5L SOHC (2001)
Clockspring Assembly / Spiral Cable: Testing and Inspection
CLOCK SPRING CHECK
Required Special Tool:
MB991613: SRS Check Harness
If, even one abnormality is discovered in Steps 1 to 5, replace the clock spring with a new one.
1. Check the connectors and protective tube for damage, and the terminals for deformation.
2. Visually check the case for damage.
3. Check continuity.
<Vehicles without auto-cruise control>
-
Check continuity between the number 1 connector terminal 3 and number 3 connector.
<Vehicles with auto-cruise control>
-
Check continuity between the number 1 connector terminal 1 and number 4 connector terminal 2, number 1 connector terminal 2 and number 4
connector terminal 3, number 1 connector 3 and number 3 connector, number 1 connector terminal 4 and number 4 connector terminal 1
respectively.