mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 4228 > < Symptom Related Diagnostic Procedures|Page 4226
Page 5
background image

STEP 3. Check the driver's side door switch.

Remove the driver's side door switch.

Q: Is the driver's side door switch in good condition?

YES: Go to Step 4.

NO: Replace it. Check that the malfunction is eliminated.

STEP 4. Check the driver's side door switch ground circuit Measure the resistance between the driver's side door switch body (metal section)
and ground.

Q: Is the resistance less than two Ohms?

YES: Go to Step 5.

NO: Repair the harness wire or connector. Then go to Step 6.

STEP 5. Check the driver's side door switch connector E-33 for damage.

Q: Is the driver's side door switch connector E-33 damaged?

YES: Repair or replace it. Refer to Harness Connector Inspection. The tachometer should work normally.

NO: Go to Step 6.

Symptom Related Diagnostic Procedures|Page 4228 > < Symptom Related Diagnostic Procedures|Page 4226