mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Instrument Panel, Gauges and Warning Indicators > < Initial Inspection and Diagnostic Overview|Page 6444
Page 2
background image

2. Turn the control switch to SET.
3. Check that deceleration continues while the switch is pressed, and that when it is released the constant speed at the time when it was released

becomes the driving speed.

NOTE:  When the vehicle speed reaches the low limit [approximately 40 km/h (25 mph)] during deceleration, the automatic speed control will be
canceled.

Auto-cruise Control Cancellation Check and Check of Return to the Set Speed Before Cancellation

1. Set the cruise speed control.
2. Check that there is a return to ordinary driving when either of the operations below is performed.

1. The cruise control switch is turned to CANCEL.
2. The brake pedal is depressed.
3. The clutch pedal is depressed. <M/T>
4. The selector lever is at "N". <A/T>

3. Turn the control switch to RESUME while driving at a vehicle speed of approximately 40 km/h (25 mph) or higher, and check that there is a return

to the cruise control speed before the function is canceled and the vehicle travels at a constant speed.

4. When driving at constant speed, check that the vehicle returns to the normal driving condition when the main switch is turned to OFF.

Instrument Panel, Gauges and Warning Indicators > < Initial Inspection and Diagnostic Overview|Page 6444