Montero SR 4WD V6-3.5L SOHC (1997)
First & Reverse Brake Disc
1. Using a micrometer, measure the thickness of the brake disc.
Limit: 1.51 mm (0.0594 inch)
NOTE: The thickness must be measured at two or three points. Compare the average value with the limit.
Return Spring Assembly
1. Measure the free length of the spring including the spring seat.
Standard value: Approximately 13.09 mm (0.5154 inch)
ASSEMBLY
Assembly in reverse order as Disassembly.
NOTE: Assembly service points as follows:
A. First & reverse brake piston No. 1 / reverse brake sleeve installation. (23 & 25)
1. Install the first & reverse brake piston No. 1 and the reverse brake sleeve together to the transmission case.
B. First & reverse brake piston No. 2 installation. (21)
1. Aligning the convex of the first & reverse brake piston No. 2 with the concave of the transmission case, install the piston to the case.