Montero SR 4WD V6-3.5L SOHC (1997)
![background image](/mitsubishi/montero_sr_4wd/v6-3.5l_sohc/Page-1319013.png)
A. Seal ring installation. (3)
1. Don't open the seal ring wider than necessary. Be careful not to bend the claws.
B. One-way clutch thrust washer No. 1 installation. (2)
1. Install the thrust washer to the sun gear input drum while aligning its convex with the hole of the drum.
C. One-way clutch assembly installation. (1)
1. Install the one-way clutch assembly to the planetary sun gear in the direction shown in the illustration.
Direct Clutch