Montero SR 4WD V6-3.5L SOHC (1997)
Standard value: 2.90 - 4.29 mm (0.1141 - 0.1689 inch)
ASSEMBLY
Assembly in reverse order as Disassembly.
NOTE: Assembly service points as follows:
A. Snap ring installation. (8)
CAUTION: Be sure the end gap of the snap ring is not aligned with the stopper of the spring seat.
B. Cushion plate installation. (7)
1. Install the cushion plate to the forward clutch drum so that its convex side is oriented to the piston side.
C. Clutch flange installation. (4)
1. Install the clutch flange to the forward clutch drum so that the flange's chamfer is oriented to the disc side.
D. Snap ring installation. (3)
1. Install the snap ring so that the end gap of the snap ring is not aligned with the inner cutout of the direct clutch drum.
Second Coast Brake Piston